Go Kitchens

My kitchen cabinets are not aligned?

I tried tightening the hinges but it seems the hole is a bit big that they are screwed into or something. My hinges are on the inside of the doors.

Public Comments

1. Try using a little bit bigger screw this should hold them.
2. Fill the hole with toothpicks and wood glue. When dry just break off the excess toothpicks.
3. On normal cabinet door hinges there are 2 screws that screw into the cabinet rails and another one that will pull the door in or out from the face of the frame. If the screw holes are striped then take off the door and remove the hinges and fill in the screw holes with a mix of saw dust and glue and let it dry then sand it you can re stain the sanded area and then re attach the door with the screws.
4. move the hinges up or down an inch or so,this will give you new wood to screw to,but you will have to do all the doors that way,or you can just drill another screw hole in the hinge and then put the screw back in it